Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application

Yanzhong Yu; Jizhen Ni; Zhixiang Xu

doi:doi:10.11648/j.wcmc.20150301.11

| Peer-Reviewed

Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application

Yanzhong Yu, Jizhen Ni, Zhixiang Xu

Published in International Journal of Wireless Communications and Mobile Computing (Volume 3, Issue 1)

Received: 25 December 2014 Accepted: 8 January 2015 Published: 20 January 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In this paper, a dual-band dipole antenna for passive radio frequency identification (RFID) tag application at 2.45 GHz and 5.8 GHz is designed and optimized using HFSS 13. The proposed antenna is composed of a bent microstrip patch and a coupled rectangular microstrip patch. The optimal results of this antenna are obtained by sweeping antenna parameters. Its return losses reach to 18.7732 dB and 18.2514 dB at 2.45 GHz and 5.8 GHz, respectively. The bandwidths (Return loss <=10 dB) are 2.42~2.50 GHz and 5.77~5.82 GHz. And the relative bandwidths are 3.3% and 0.9%. It shows good impedance, gain, and radiation characteristics for both bands of interest. Besides, the input impedance of the proposed antenna may be tuned flexibly to conjugate-match to that of the IC chip.

Published in	International Journal of Wireless Communications and Mobile Computing (Volume 3, Issue 1)
DOI	10.11648/j.wcmc.20150301.11
Page(s)	1-6
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

RFID, Dipole Antenna, Dual Frequency, Tag

References

[1]	A. Ali Babar, T. Björninen, V.A. Bhagavati, L. Sydänheimo, P. Kallio, and L. Ukkonen. Small and Flexible Metal Mountable Passive UHF RFID Tag on High-Dielectric Polymer-Ceramic Composite Substrate. IEEE Antennas Wirel. Propag. Lett. Vol. 11, pp. 1319–1322, 2012.
[2]	E. Digiampaolo, and F. Martinelli. Mobile robot localization using the phase of passive UHF RFID signals. IEEE Trans. Ind. Electron. Vol. 6, No. 1, pp. 365–376, Jan. 2014.
[3]	S. M. Hu, Y. Zhou, C. L. Law, and W. B. Dou. Study of a Uniplanar Monopole Antenna for Passive Chipless UWB-RFID Localization System. IEEE Trans. Antennas Propag., Vol. 58, pp. 271–278, 2010.
[4]	H. T. Chou, T. M. Hung, N. N. Wang, et.al. Design of a near-field focused reflect array antenna for 2.4 GHz RFID reader applications. IEEE Trans. on Antennas and Propag., Vol. 59, pp. 1013–1018, 2011.
[5]	S. Jeon, Y. Yu, and J. Choi. Dual-band slot-coupled dipole antenna for 900MHz and 2.45 GHz RFID tag application. Electronics Letters, Vol. 42, No. 22, Oct. 2006.
[6]	K.V. S. Rao, P. V. Nikitin, and S. F. Sander. Antenna design for UHF RFID tags: a review and a practical application. IEEE Trans. Antennas Propag., Vol. 53, No. 12, pp. 3870–876, Dec. 2005.
[7]	Raviteja, Chinnambeti; Varadhan, Chitra; Kanagasabai, Malathi; Sarma, Aswathy K.; Velan, Sangeetha. A fractal-based circularly polarized UHF RFID reader antenna. IEEE Antennas Wirel. Propag. Lett., Vol. 13, pp. 499–502, 2014.
[8]	Dongho Kim, and Junho Yeo. Dual-Band Long-Range Passive RFID Tag Antenna Using an AMC Ground Plane Digiampaolo, F. Martinelli. IEEE Trans. Antennas Propag., Vol. 60, No. 6, pp. 2620–2626, June 2012.
[9]	C. Varadhan, J. K. Pakkathillam, M. Kanagasabai, R. Sivasamy, R. Natarajan, and S. K. Palaniswamy. Triband Antenna Structures for RFID Systems Deploying Fractal Geometry. IEEE Antennas Wirel. Propag. Lett., Vol. 12, pp. 437–440, 2013.
[10]	Young-Ho Suh, and Kai Chang. A high-efficiency dual-frequency rectenna for 2.45- and 5.8-GHz wireless power transmission. IEEE Trans. Microw. Theory & Tech., Vol. 50, No. 7, pp. 1784–1789, 2002.
[11]	A. T. Mobashsher, M. T. Islam, and N. A. Misran. A Novel High-Gain Dual-Band Antenna for RFID Reader Applications. IEEE Antennas Wirel. Propag. Lett. Vol. 9, pp. 653–656, 2010.
[12]	J. R. Panda, and R. S. Kshetrimayum. A printed 2.4 GHz/5.8 GHz dual-band monopole antenna with a protruding stub in the ground plane for WLAN and RFID applications. Progress In Electromagnetics Research, Vol. 117, pp. 425–434, 2011.
[13]	Ansoft High Frequency Structure Simulator (HFSS), Ver. 13.0, Ansoft Corporation.
[14]	B. Yang, Q. Y. Feng. A folded dipole antenna for RFID tag. Int. Conf. Microw. Millimeter Wave Technol. Proc. 2008, pp. 1047–1049, Nanjing, China.

Cite This Article

Plain Text BibTeX RIS

APA Style

Yanzhong Yu, Jizhen Ni, Zhixiang Xu. (2015). Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application. International Journal of Wireless Communications and Mobile Computing, 3(1), 1-6. https://doi.org/10.11648/j.wcmc.20150301.11

Copy | Download

ACS Style

Yanzhong Yu; Jizhen Ni; Zhixiang Xu. Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application. Int. J. Wirel. Commun. Mobile Comput. 2015, 3(1), 1-6. doi: 10.11648/j.wcmc.20150301.11

Copy | Download

AMA Style

Yanzhong Yu, Jizhen Ni, Zhixiang Xu. Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application. Int J Wirel Commun Mobile Comput. 2015;3(1):1-6. doi: 10.11648/j.wcmc.20150301.11

Copy | Download

@article{10.11648/j.wcmc.20150301.11,
  author = {Yanzhong Yu and Jizhen Ni and Zhixiang Xu},
  title = {Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application},
  journal = {International Journal of Wireless Communications and Mobile Computing},
  volume = {3},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.wcmc.20150301.11},
  url = {https://doi.org/10.11648/j.wcmc.20150301.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.wcmc.20150301.11},
  abstract = {In this paper, a dual-band dipole antenna for passive radio frequency identification (RFID) tag application at 2.45 GHz and 5.8 GHz is designed and optimized using HFSS 13. The proposed antenna is composed of a bent microstrip patch and a coupled rectangular microstrip patch. The optimal results of this antenna are obtained by sweeping antenna parameters. Its return losses reach to 18.7732 dB and 18.2514 dB at 2.45 GHz and 5.8 GHz, respectively. The bandwidths (Return loss <=10 dB) are 2.42~2.50 GHz and 5.77~5.82 GHz. And the relative bandwidths are 3.3% and 0.9%. It shows good impedance, gain, and radiation characteristics for both bands of interest. Besides, the input impedance of the proposed antenna may be tuned flexibly to conjugate-match to that of the IC chip.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application
AU  - Yanzhong Yu
AU  - Jizhen Ni
AU  - Zhixiang Xu
Y1  - 2015/01/20
PY  - 2015
N1  - https://doi.org/10.11648/j.wcmc.20150301.11
DO  - 10.11648/j.wcmc.20150301.11
T2  - International Journal of Wireless Communications and Mobile Computing
JF  - International Journal of Wireless Communications and Mobile Computing
JO  - International Journal of Wireless Communications and Mobile Computing
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2330-1015
UR  - https://doi.org/10.11648/j.wcmc.20150301.11
AB  - In this paper, a dual-band dipole antenna for passive radio frequency identification (RFID) tag application at 2.45 GHz and 5.8 GHz is designed and optimized using HFSS 13. The proposed antenna is composed of a bent microstrip patch and a coupled rectangular microstrip patch. The optimal results of this antenna are obtained by sweeping antenna parameters. Its return losses reach to 18.7732 dB and 18.2514 dB at 2.45 GHz and 5.8 GHz, respectively. The bandwidths (Return loss <=10 dB) are 2.42~2.50 GHz and 5.77~5.82 GHz. And the relative bandwidths are 3.3% and 0.9%. It shows good impedance, gain, and radiation characteristics for both bands of interest. Besides, the input impedance of the proposed antenna may be tuned flexibly to conjugate-match to that of the IC chip.
VL  - 3
IS  - 1
ER  -

Copy | Download

Author Information

Yanzhong Yu

College of Physics & Information Engineering, Quanzhou Normal University, Fujian, China
Jizhen Ni

College of Physics & Information Engineering, Quanzhou Normal University, Fujian, China
Zhixiang Xu

College of Physics & Information Engineering, Quanzhou Normal University, Fujian, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yanzhong Yu, Jizhen Ni, Zhixiang Xu. (2015). Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application. International Journal of Wireless Communications and Mobile Computing, 3(1), 1-6. https://doi.org/10.11648/j.wcmc.20150301.11

Copy | Download

ACS Style

Yanzhong Yu; Jizhen Ni; Zhixiang Xu. Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application. Int. J. Wirel. Commun. Mobile Comput. 2015, 3(1), 1-6. doi: 10.11648/j.wcmc.20150301.11

Copy | Download

AMA Style

Yanzhong Yu, Jizhen Ni, Zhixiang Xu. Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application. Int J Wirel Commun Mobile Comput. 2015;3(1):1-6. doi: 10.11648/j.wcmc.20150301.11

Copy | Download

@article{10.11648/j.wcmc.20150301.11,
  author = {Yanzhong Yu and Jizhen Ni and Zhixiang Xu},
  title = {Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application},
  journal = {International Journal of Wireless Communications and Mobile Computing},
  volume = {3},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.wcmc.20150301.11},
  url = {https://doi.org/10.11648/j.wcmc.20150301.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.wcmc.20150301.11},
  abstract = {In this paper, a dual-band dipole antenna for passive radio frequency identification (RFID) tag application at 2.45 GHz and 5.8 GHz is designed and optimized using HFSS 13. The proposed antenna is composed of a bent microstrip patch and a coupled rectangular microstrip patch. The optimal results of this antenna are obtained by sweeping antenna parameters. Its return losses reach to 18.7732 dB and 18.2514 dB at 2.45 GHz and 5.8 GHz, respectively. The bandwidths (Return loss <=10 dB) are 2.42~2.50 GHz and 5.77~5.82 GHz. And the relative bandwidths are 3.3% and 0.9%. It shows good impedance, gain, and radiation characteristics for both bands of interest. Besides, the input impedance of the proposed antenna may be tuned flexibly to conjugate-match to that of the IC chip.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Dual-Band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application
AU  - Yanzhong Yu
AU  - Jizhen Ni
AU  - Zhixiang Xu
Y1  - 2015/01/20
PY  - 2015
N1  - https://doi.org/10.11648/j.wcmc.20150301.11
DO  - 10.11648/j.wcmc.20150301.11
T2  - International Journal of Wireless Communications and Mobile Computing
JF  - International Journal of Wireless Communications and Mobile Computing
JO  - International Journal of Wireless Communications and Mobile Computing
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2330-1015
UR  - https://doi.org/10.11648/j.wcmc.20150301.11
AB  - In this paper, a dual-band dipole antenna for passive radio frequency identification (RFID) tag application at 2.45 GHz and 5.8 GHz is designed and optimized using HFSS 13. The proposed antenna is composed of a bent microstrip patch and a coupled rectangular microstrip patch. The optimal results of this antenna are obtained by sweeping antenna parameters. Its return losses reach to 18.7732 dB and 18.2514 dB at 2.45 GHz and 5.8 GHz, respectively. The bandwidths (Return loss <=10 dB) are 2.42~2.50 GHz and 5.77~5.82 GHz. And the relative bandwidths are 3.3% and 0.9%. It shows good impedance, gain, and radiation characteristics for both bands of interest. Besides, the input impedance of the proposed antenna may be tuned flexibly to conjugate-match to that of the IC chip.
VL  - 3
IS  - 1
ER  -

Copy | Download