Main Weaving Nozzles - Ejectors

Karel Adamek; Jan Kolar; Jaroslav Pelant; Jan Simak; Simone Gramsch

doi:doi:10.11648/j.ijmea.s.2015030101.12

| Peer-Reviewed

Main Weaving Nozzles - Ejectors

Karel Adamek, Jan Kolar, Jaroslav Pelant, Jan Simak, Simone Gramsch

Published in International Journal of Mechanical Engineering and Applications (Volume 3, Issue 1-1)

Received: 9 September 2014 Accepted: 12 September 2014 Published: 17 October 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The paper deals both with numerical flow simulations and experiments in ejectors, used here first of all as main weaving nozzles, further as a source of air suction, etc. The problem of high noise level of expanded air flow is discussed, too.

Published in	International Journal of Mechanical Engineering and Applications (Volume 3, Issue 1-1) This article belongs to the Special Issue Numerical Flow Simulations in Textile Industry
DOI	10.11648/j.ijmea.s.2015030101.12
Page(s)	5-12
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Numerical Flow Simulation, Ejector, Weaving Nozzle, Aerodynamic Noise

References

[1]	K. Adamek,"Conditions for High-quality and Reliable Air Jet Weft Insertion", Vlákna a textil (Fibers and textiles – in Czech) 5(3), 123-130 (1998), ISSN 1335-0617.
[2]	K. Adamek, "Conditions for High-quality and Reliable Air Jet Weft Insertion", 2nd int. conf. Novelties in weaving research, TU Liberec, 1998 (EU project Copernicus).
[3]	K. Adamek, "Numerical modelling the air flow in parts of air jet loom", CAMES (Comput. Assist. Mech. and Eng. Sciences), special issue, 6, 251-263, 1999, Polish Academy of Sciences Warsaw.
[4]	K. Adamek, "Numerical modelling the air flow in parts of air jet loom", 8th int. conf. on numer. math. and comput. mech. (NMCM98), University of Miskolc, Hungary, 1998.
[5]	J. Pelant, K. Adamek, "Boundary value conditions for some 3D axis-symmetrical flow", Proc. ECCOMAS CFD 2001, University of Wales, Swansea, 2001, ISBN 0-905091-11-6.
[6]	K. Adamek, "Numerical modelling of air flow in air jet weaving system", Internat. J. Polymeric. Mater., 2000, Vol. 47, pp. 613-623, ISSN ….
[7]	K. Adamek, "Numerical modelling of air flow in air jet weaving system", 32nd internat. symp. on novelties in textiles, University of Ljubljana, 1998, ISBN 961-6045-11-3.
[8]	K. Adamek, "Numerical modelling of the flow effect on the weft during air jet weaving", VII. Internat. Congress on the Theory of Machines and Mechanisms, TU Liberec, 1996, ISBN 80-7083-198-7 (in Czech).
[9]	K. Adamek, "Flow description in the air jet weaving system by FVM", Quo vadis textrinum, NMC Zilina, Strbske Pleso, 1996, ISBN 80-856655-06-3 (in Czech).
[10]	K. Adamek, "Experience with FVM in Research of Air Jet Weaving System", Computer Modeling and Simulation in Engineering (CMSE), Vol. 1, Sage Science Press, 1996.
[11]	K. Adamek, "Beschreibung der Webduesenstroemung mit FVM", 5. Chemnitzer Textilmaschinen-Tagung, TU Chemnitz, 1995.
[12]	K. Adamek, "Design of parts for air jet weft insertion by FVM", Int. Conf. Young textile science, TU Liberec, 1995.
[13]	K. Adamek, "Flow description in the air jet weaving system by FVM", Xth. sci. conf. Applic. of exp. meth. in fluid mech., VSDS Zilina, Strba, 1995 (in Czech).
[14]	K. Adamek, "Le tissage a jet d’air", seminaire IMST, Univ. Marseille, 1994.
[15]	J. Kolar, K. Adamek, V. Dvorak, "Aeroacoustic of jet induced noise", Conference of fluid- and thermomechanics departments on technical universities, 2009 (in Czech).
[16]	J. Kolar, K. Adamek, "Aeroacoustic of simple shaped nozzles", EFM 2009 (Exp. Fluid Mech.), TU Liberec, Jicin, 2009, ISBN 978-80-7372-538-9.
[17]	J. Simak, "Aeroacoustic analysis of circular nozzle", Transfer, VZLÚ Praha, No. 15, vol. 6, 2011. ISSN 1801-9315 (in Czech).
[18]	K. Adamek, "Air flows in nozzles of air jet looms", VIth sci. conf. Applic. of exp. meth. in fluid mech. VSDS Zilina, Jasna, 1987 (in Czech).
[19]	K. Adamek, "Applications of numerical flow modeling in designer’s practice", XIVth int. conf. Applic. of exp. and numer. meth. in fluid mech., ZU Zilina, 2004. ISBN 80-8070-234-9 (in Czech).
[20]	V. Tesar, "Reversation paradox", Acta technica. ČVUT Praha, 1984 (in Czech).
[21]	K. Adamek, J. Pelant, "Reversation flow in ejector", XVIIth sci. conf. Applic. of exp. and numer. meth. in fluid mech. ZU Zilina, Bojnice 2010. ISBN 978-80-554-0189-8 (in Czech).
[22]	J. Kolar, K. Adamek, J. Pelant, "Reversation flow in an ejector", Strutex, TU Liberec, 2010. ISBN 978-80-7372-664-5.
[23]	S. Gramsch, D. Hietel, "Fadenschuss mittels Luftstrom", report of the Fraunhofer ITWM Kaiserslautern

Cite This Article

Plain Text BibTeX RIS

APA Style

Karel Adamek, Jan Kolar, Jaroslav Pelant, Jan Simak, Simone Gramsch. (2014). Main Weaving Nozzles - Ejectors. International Journal of Mechanical Engineering and Applications, 3(1-1), 5-12. https://doi.org/10.11648/j.ijmea.s.2015030101.12

Copy | Download

ACS Style

Karel Adamek; Jan Kolar; Jaroslav Pelant; Jan Simak; Simone Gramsch. Main Weaving Nozzles - Ejectors. Int. J. Mech. Eng. Appl. 2014, 3(1-1), 5-12. doi: 10.11648/j.ijmea.s.2015030101.12

Copy | Download

AMA Style

Karel Adamek, Jan Kolar, Jaroslav Pelant, Jan Simak, Simone Gramsch. Main Weaving Nozzles - Ejectors. Int J Mech Eng Appl. 2014;3(1-1):5-12. doi: 10.11648/j.ijmea.s.2015030101.12

Copy | Download

@article{10.11648/j.ijmea.s.2015030101.12,
  author = {Karel Adamek and Jan Kolar and Jaroslav Pelant and Jan Simak and Simone Gramsch},
  title = {Main Weaving Nozzles - Ejectors},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {3},
  number = {1-1},
  pages = {5-12},
  doi = {10.11648/j.ijmea.s.2015030101.12},
  url = {https://doi.org/10.11648/j.ijmea.s.2015030101.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.s.2015030101.12},
  abstract = {The paper deals both with numerical flow simulations and experiments in ejectors, used here first of all as main weaving nozzles, further as a source of air suction, etc. The problem of high noise level of expanded air flow is discussed, too.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Main Weaving Nozzles - Ejectors
AU  - Karel Adamek
AU  - Jan Kolar
AU  - Jaroslav Pelant
AU  - Jan Simak
AU  - Simone Gramsch
Y1  - 2014/10/17
PY  - 2014
N1  - https://doi.org/10.11648/j.ijmea.s.2015030101.12
DO  - 10.11648/j.ijmea.s.2015030101.12
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 5
EP  - 12
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.s.2015030101.12
AB  - The paper deals both with numerical flow simulations and experiments in ejectors, used here first of all as main weaving nozzles, further as a source of air suction, etc. The problem of high noise level of expanded air flow is discussed, too.
VL  - 3
IS  - 1-1
ER  -

Copy | Download

Author Information

Karel Adamek

VúTS – Centre of Machinery Research, Liberec, Czech Rep
Jan Kolar

VúTS – Centre of Machinery Research, Liberec, Czech Rep
Jaroslav Pelant

VZLú – Aeronautical Research and Testing Institute, Praha, Czech Rep
Jan Simak

VZLú – Aeronautical Research and Testing Institute, Praha, Czech Rep
Simone Gramsch

Fraunhofer ITWM, Kaiserslautern, Germany

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Karel Adamek, Jan Kolar, Jaroslav Pelant, Jan Simak, Simone Gramsch. (2014). Main Weaving Nozzles - Ejectors. International Journal of Mechanical Engineering and Applications, 3(1-1), 5-12. https://doi.org/10.11648/j.ijmea.s.2015030101.12

Copy | Download

ACS Style

Karel Adamek; Jan Kolar; Jaroslav Pelant; Jan Simak; Simone Gramsch. Main Weaving Nozzles - Ejectors. Int. J. Mech. Eng. Appl. 2014, 3(1-1), 5-12. doi: 10.11648/j.ijmea.s.2015030101.12

Copy | Download

AMA Style

Karel Adamek, Jan Kolar, Jaroslav Pelant, Jan Simak, Simone Gramsch. Main Weaving Nozzles - Ejectors. Int J Mech Eng Appl. 2014;3(1-1):5-12. doi: 10.11648/j.ijmea.s.2015030101.12

Copy | Download

@article{10.11648/j.ijmea.s.2015030101.12,
  author = {Karel Adamek and Jan Kolar and Jaroslav Pelant and Jan Simak and Simone Gramsch},
  title = {Main Weaving Nozzles - Ejectors},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {3},
  number = {1-1},
  pages = {5-12},
  doi = {10.11648/j.ijmea.s.2015030101.12},
  url = {https://doi.org/10.11648/j.ijmea.s.2015030101.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.s.2015030101.12},
  abstract = {The paper deals both with numerical flow simulations and experiments in ejectors, used here first of all as main weaving nozzles, further as a source of air suction, etc. The problem of high noise level of expanded air flow is discussed, too.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Main Weaving Nozzles - Ejectors
AU  - Karel Adamek
AU  - Jan Kolar
AU  - Jaroslav Pelant
AU  - Jan Simak
AU  - Simone Gramsch
Y1  - 2014/10/17
PY  - 2014
N1  - https://doi.org/10.11648/j.ijmea.s.2015030101.12
DO  - 10.11648/j.ijmea.s.2015030101.12
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 5
EP  - 12
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.s.2015030101.12
AB  - The paper deals both with numerical flow simulations and experiments in ejectors, used here first of all as main weaving nozzles, further as a source of air suction, etc. The problem of high noise level of expanded air flow is discussed, too.
VL  - 3
IS  - 1-1
ER  -

Copy | Download