A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province)

Mohammad Taghipour; Milad Safari; Hamed Bagheri

doi:doi:10.11648/j.cssp.20150405.11

| Peer-Reviewed

A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province)

Mohammad Taghipour, Milad Safari, Hamed Bagheri

Published in Science Journal of Circuits, Systems and Signal Processing (Volume 4, Issue 5)

Received: 19 August 2015 Accepted: 25 August 2015 Published: 2 September 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Recently Broadband over power lines (BPL) has received much attention in communication technology and this is due to economically of sending high data rate services by re-use of power line cables. As data transfer via power lines to final consumer is one of the growing technologies, this study discusses the modeling and optimization of data transfer via power transfer lines and feasibility and adaptation of using this technology in Gilan are investigated. Finally, a model is evaluated for power lines by selection of a cable in selected area (Gilan province) as high speed transfer media and by investigation of the effect of different loads on channel feature, simulation and transfer function between various areas of network are considered. Simulation is done by ABCD transfer matrix and channel frequency response is achieved. This model is useful in description of frequency response of lines of this network and application in design of data transfer system.

Published in	Science Journal of Circuits, Systems and Signal Processing (Volume 4, Issue 5)
DOI	10.11648/j.cssp.20150405.11
Page(s)	30-40
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

High Speed Data Transfer, Power Lines, BPL, Channel Simulation

References

[1]	Azadedel, Ramezanali; Majid Nader, Mohammad Rezayi. 2003. Modeling and optimization of data transfer in house networks. 18^th international conference of power. Tehran. Tavanir Company. Energy research center.
[2]	Asadzade, Vahid; Saeed, Pouyafar, Seyed Mohammad Taghi Bathayi. 2008. Problems and limitations of BPL systems as telecommunication ground in electricity distribution networks. 23th International conference of power. Tehran. Tavanir company. Energy research.
[3]	Abbasimoghadam, Dariush; Zohre, Moades, Mehdi Nasiri Sarvi. 2006. Telecommunication parameters of power distribution lines and minimizing the effects of parameters on data transfer. 11^th conference of electricity distribution networks. Mahmoudabad.
[4]	Mirjalili, Qasem; Ali Mohammadi, Abolfazl Asadi. 2005. The evaluation of modulation methods in high speed sending of data on electricity distribution networks of low pressure. 13^th conference of electricity engineering of Iran. Zanjan. Zanjan University.
[5]	Antoniali, M. and. Tonello, A. M. Senior Member, IEEE “Measurement and Characterization of Load Impedances in Home Power Line Grids” Submitted on February 2013. Revised on May10, 2013 and on June 22, 2013.Accepted on June 26, 2013.
[6]	Arthur, D. Little, "White Paper on Power Line Communications", Oct 2004.
[7]	Babic, M. Hagenau, M. Dostert, K. Bausch, J. ”open plc European Research Alliance”, ”Theoretical postulation of PLC channel model” EC/IST FP6 Project No 507667,2001
[8]	Canete, F. Cort´es, J. D´iez, L and Entrambasaguas, J. “A channel model proposal for indoor power line communications,” in IEEE Communications Magazine, January 2011.
[9]	Gebhardt, M. Weinmann, F. Dostert, K.” Physical and Regulatory Constraints for Communication over the Power Supply Grid”, IEEE Communications Magazine, May 2003, vol.19,pp.84-90.
[10]	Mork, B. A. “Power Line Carrier Communications System Modeling ”, International Conference on Power Systems Transients (IPST’05) in Montreal, Canada on June 19-23, Paper No. IPST05 - 247, 2005.
[11]	Marrocco, G. Statovci, D. Trautmann, S. “A PLC Broadband Channel Simulator for Indoor Communications”, April 2012.
[12]	Meng, H. Chen, S. Guan, Y. L. Law, C.L. So, P. L. Gunawan, E.and.Lie, T. T. “ATransmission Line Model for High- Frequency Power Line Communication Channel”, 2002 IEEE.
[13]	Schickuber, S. "Control using power line:Aeuropeanview",Computing& Control Eng. Jour, pp. 180-184.,Aug 1997.

Cite This Article

Plain Text BibTeX RIS

APA Style

Mohammad Taghipour, Milad Safari, Hamed Bagheri. (2015). A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province). Science Journal of Circuits, Systems and Signal Processing, 4(5), 30-40. https://doi.org/10.11648/j.cssp.20150405.11

Copy | Download

ACS Style

Mohammad Taghipour; Milad Safari; Hamed Bagheri. A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province). Sci. J. Circuits Syst. Signal Process. 2015, 4(5), 30-40. doi: 10.11648/j.cssp.20150405.11

Copy | Download

AMA Style

Mohammad Taghipour, Milad Safari, Hamed Bagheri. A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province). Sci J Circuits Syst Signal Process. 2015;4(5):30-40. doi: 10.11648/j.cssp.20150405.11

Copy | Download

@article{10.11648/j.cssp.20150405.11,
  author = {Mohammad Taghipour and Milad Safari and Hamed Bagheri},
  title = {A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province)},
  journal = {Science Journal of Circuits, Systems and Signal Processing},
  volume = {4},
  number = {5},
  pages = {30-40},
  doi = {10.11648/j.cssp.20150405.11},
  url = {https://doi.org/10.11648/j.cssp.20150405.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.cssp.20150405.11},
  abstract = {Recently Broadband over power lines (BPL) has received much attention in communication technology and this is due to economically of sending high data rate services by re-use of power line cables. As data transfer via power lines to final consumer is one of the growing technologies, this study discusses the modeling and optimization of data transfer via power transfer lines and feasibility and adaptation of using this technology in Gilan are investigated. Finally, a model is evaluated for power lines by selection of a cable in selected area (Gilan province) as high speed transfer media and by investigation of the effect of different loads on channel feature, simulation and transfer function between various areas of network are considered. Simulation is done by ABCD transfer matrix and channel frequency response is achieved. This model is useful in description of frequency response of lines of this network and application in design of data transfer system.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province)
AU  - Mohammad Taghipour
AU  - Milad Safari
AU  - Hamed Bagheri
Y1  - 2015/09/02
PY  - 2015
N1  - https://doi.org/10.11648/j.cssp.20150405.11
DO  - 10.11648/j.cssp.20150405.11
T2  - Science Journal of Circuits, Systems and Signal Processing
JF  - Science Journal of Circuits, Systems and Signal Processing
JO  - Science Journal of Circuits, Systems and Signal Processing
SP  - 30
EP  - 40
PB  - Science Publishing Group
SN  - 2326-9073
UR  - https://doi.org/10.11648/j.cssp.20150405.11
AB  - Recently Broadband over power lines (BPL) has received much attention in communication technology and this is due to economically of sending high data rate services by re-use of power line cables. As data transfer via power lines to final consumer is one of the growing technologies, this study discusses the modeling and optimization of data transfer via power transfer lines and feasibility and adaptation of using this technology in Gilan are investigated. Finally, a model is evaluated for power lines by selection of a cable in selected area (Gilan province) as high speed transfer media and by investigation of the effect of different loads on channel feature, simulation and transfer function between various areas of network are considered. Simulation is done by ABCD transfer matrix and channel frequency response is achieved. This model is useful in description of frequency response of lines of this network and application in design of data transfer system.
VL  - 4
IS  - 5
ER  -

Copy | Download

Author Information

Mohammad Taghipour

Department of Industrial Engineering, Science & Research Branch of Islamic Azad University, Tehran, Iran
Milad Safari

Electrical Engineering Telecommunications, Non-profit Institution of Higher Education, Aba Abyek Qazvin, Iran
Hamed Bagheri

Electrical Engineering Telecommunications, Non-profit Institution of Higher Education, Aba Abyek Qazvin, Iran

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Mohammad Taghipour, Milad Safari, Hamed Bagheri. (2015). A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province). Science Journal of Circuits, Systems and Signal Processing, 4(5), 30-40. https://doi.org/10.11648/j.cssp.20150405.11

Copy | Download

ACS Style

Mohammad Taghipour; Milad Safari; Hamed Bagheri. A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province). Sci. J. Circuits Syst. Signal Process. 2015, 4(5), 30-40. doi: 10.11648/j.cssp.20150405.11

Copy | Download

AMA Style

Mohammad Taghipour, Milad Safari, Hamed Bagheri. A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province). Sci J Circuits Syst Signal Process. 2015;4(5):30-40. doi: 10.11648/j.cssp.20150405.11

Copy | Download

@article{10.11648/j.cssp.20150405.11,
  author = {Mohammad Taghipour and Milad Safari and Hamed Bagheri},
  title = {A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province)},
  journal = {Science Journal of Circuits, Systems and Signal Processing},
  volume = {4},
  number = {5},
  pages = {30-40},
  doi = {10.11648/j.cssp.20150405.11},
  url = {https://doi.org/10.11648/j.cssp.20150405.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.cssp.20150405.11},
  abstract = {Recently Broadband over power lines (BPL) has received much attention in communication technology and this is due to economically of sending high data rate services by re-use of power line cables. As data transfer via power lines to final consumer is one of the growing technologies, this study discusses the modeling and optimization of data transfer via power transfer lines and feasibility and adaptation of using this technology in Gilan are investigated. Finally, a model is evaluated for power lines by selection of a cable in selected area (Gilan province) as high speed transfer media and by investigation of the effect of different loads on channel feature, simulation and transfer function between various areas of network are considered. Simulation is done by ABCD transfer matrix and channel frequency response is achieved. This model is useful in description of frequency response of lines of this network and application in design of data transfer system.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - A Survey of BPL Technology and Feasibility of Its Application in Iran (Gilan Province)
AU  - Mohammad Taghipour
AU  - Milad Safari
AU  - Hamed Bagheri
Y1  - 2015/09/02
PY  - 2015
N1  - https://doi.org/10.11648/j.cssp.20150405.11
DO  - 10.11648/j.cssp.20150405.11
T2  - Science Journal of Circuits, Systems and Signal Processing
JF  - Science Journal of Circuits, Systems and Signal Processing
JO  - Science Journal of Circuits, Systems and Signal Processing
SP  - 30
EP  - 40
PB  - Science Publishing Group
SN  - 2326-9073
UR  - https://doi.org/10.11648/j.cssp.20150405.11
AB  - Recently Broadband over power lines (BPL) has received much attention in communication technology and this is due to economically of sending high data rate services by re-use of power line cables. As data transfer via power lines to final consumer is one of the growing technologies, this study discusses the modeling and optimization of data transfer via power transfer lines and feasibility and adaptation of using this technology in Gilan are investigated. Finally, a model is evaluated for power lines by selection of a cable in selected area (Gilan province) as high speed transfer media and by investigation of the effect of different loads on channel feature, simulation and transfer function between various areas of network are considered. Simulation is done by ABCD transfer matrix and channel frequency response is achieved. This model is useful in description of frequency response of lines of this network and application in design of data transfer system.
VL  - 4
IS  - 5
ER  -

Copy | Download